Scion xB Forum banner
Status
Not open for further replies.
1 - 11 of 11 Posts

·
Registered
Joined
·
224 Posts
Discussion Starter · #1 ·
Hey guys got my springs today gonna put them in later this week.
Want to know if i just wrap the rear springs with the black plastic stuff.
The instructions are kinda weird to read. thanks in advance.
 

·
Registered
Joined
·
66 Posts
yeah, you should only need to wrap the bottom half. It keeps the springs from clanking. I need to wrap my coilovers with that stuff.
 

·
Registered
Joined
·
108 Posts
Those are Tanabe df210's. Good springs with a nice drop. 2.2in front and 2in rear drop. Got em on my box
 

·
06.5 TCM
Joined
·
10,027 Posts
With the right amount of WD-40 or talk powder you can slide 2 feet of heater hose over it. Will last longer.
 

·
TheOtherGuys
Joined
·
7,988 Posts
Just like your doing it, both top and bottom. Cut it right where you stopped wrapping..
 

·
TheOtherGuys
Joined
·
7,988 Posts
You can even just transfer the ones off the stock ones, just put them where they were on the stock springs, easy.
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top