Scion xB Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
322 Posts
Discussion Starter · #1 ·
Cross posted from SL (didn't know if we're supposed to link to their site)

So here's the system I purchased.

Eclipse CD4000 headunit

XR650-CSi Component speakers 6.5in
XR650-CX Coaxial speakers 6.5in
JL 300/4 amp for the speakers

(2) JL 12w3's in a prowedge box
JL 500/1 amp for the subs

My question is both sets of speakers are 6.5in, so will I have trouble getting them to fit, or will they mount okay. If they won't fit how can I make them any suggestions are appreciated.
 

·
Nor*Cal's Most Hated
Joined
·
3,841 Posts
You'll need to do a bit of trimming in the rear to get the 6.5s to fit, or just get some MDF rings, and it'll be all good.

The fronts should be good, but you may need MDF rings there also. I did w/ mine.
 

·
Registered
Joined
·
322 Posts
Discussion Starter · #3 ·
Would i be able to go any stereo shop and get the mdf rings?
 

·
Registered
Joined
·
25 Posts
dude, just cut around the fac 6 1/2 and use the left over "ring" to mount your new 6 1/2's no mdf needed, your wanting to remove just the speaker and leave the rest, good luck
 

·
Registered
Joined
·
25 Posts
oh, and i wouldn't worry about the rear speakers, i've also got 2 12's and trust me nobodys going to hear'em even if you did change'em, lol
 

·
Registered
Joined
·
322 Posts
Discussion Starter · #6 ·
Thanks for your input eveyone. I'll try to post pics when I get the stuff installed.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top