Scion xB Forum banner

1 - 20 of 64 Posts

·
Registered
Joined
·
2,091 Posts
Discussion Starter #1 (Edited)
PLEASE READ ALL OF THIS AND DETAILS ON EACH PHOTO!!!

the time has come to start the part out of my super fun, very bad ass daily driven baby, Yellow. i will post up as much details as possible about each item for sale.

pics were taken pretty much as soon as the parts came off the car. i will do my best to clean them up, as most of them are just dirty cuz i havent washed the car in years.

i am WILLING TO SHIP, but PRICES DO NOT INCLUDE SHIPPING unless otherwise stated in the pic info! prices for each item are on each individual items picture. feel free to make offers, but please dont lowball me, as i am in no rush to sell this stuff,.

please feel free to share this album to help make a sale or tag a friend that might want something!!


***i have updated and consolidated everything i have left to just the first page.

i have a few other items, but i cant put pics up because the pics i have exceed file size allowed.

Painted nighthawk black (black with blue flake) fuse box cover. this is the fuse box by the battery. $25 shipped

Painted nighthawk black (black with blue flake) relay cover. this is the relay box on the passenger side engine compartment. $25 shipped

gen1 xb drivers side C pillar 10" shallow mount sub enclosure. fitment is just ok because its unfinished.. needs a spacer for the seat belt bolt that i will include. $150 plus shipping and paypal fees for the enclosure alone, or $230 for the enclosure and the pioneer shallow mount sub.plus shipping and paypal fees.


i also have a few other misc oem items that i still need to organize and take pics of. oem header for example.
 
  • Like
Reactions: Keptwench

·
Registered
Joined
·
2,091 Posts
Discussion Starter #2 (Edited)
sold item here
 

·
Registered
Joined
·
2,091 Posts
Discussion Starter #3 (Edited)
gen1 xb custom built battery bracket. mounts on the frame in the front bumper on the drivers side just under the fog light. some trimming of the back side of the bumper by the lowest grill is required, but not visible from the outside of the car.
this was built specifically for an optima yellow top, but im sure other batteries will fit. yellow top fits snug and wont move, but i had a long zip tie around it just in case, which ill include.
comes with mounting hardware.
can definitely use a good sanding.
$50 plus shipping and paypal fees.
 

Attachments

·
Registered
Joined
·
2,091 Posts
Discussion Starter #4 (Edited)
sold item here
 

·
Registered
Joined
·
2,091 Posts
Discussion Starter #5 (Edited)
JBL C608GTI 6.5" components.

150wrms/600w peak

perfect working condition

$300 plus shipping and paypal fees
 

Attachments

·
Registered
Joined
·
2,091 Posts
Discussion Starter #6 (Edited)
Air components:

2x check valves $10 each

2x dual digital air gauges $50 each or both for $90
the gauges each have a couple of the number lines out on them, maybe 2-3 on each gauge. normally sell for $100 each, but figured 2 together cheaper would be ok. can still read every number.

gen1 xb switch panel. i will fill it with buttons before it ships out. this panel mounts to the left of the steering column just under the dimmer switch and side mirror controls. i used this when i first started the adventure with airbags. these are just buttons, if you want to wire them to control airbags, you need diodes to isolate them and they need to be wired to solenoids or a manifold.
$15 shipped
 

Attachments

·
Registered
Joined
·
2,091 Posts
Discussion Starter #7 (Edited)
sold item here
 

·
Registered
Joined
·
2,091 Posts
Discussion Starter #8 (Edited)
sold item here
 
  • Like
Reactions: EquisBe

·
Registered
Joined
·
2,091 Posts
Discussion Starter #9 (Edited)
MOMO "jet" steering wheel. carbon fiber insterts. has some wear on the top from all of my super aggressive speed racing driving..... lol. i will also include a black horn button. $175 plus shipping and paypal fees.

NRG quick release. i believe its a gen1 or gen 2. $70 plus shipping and paypal fees.

no name scion xb gen1 steering wheel hub. $20 plus shipping and paypal fees.

buy all 3 together for $240 plus shipping and paypal fees
 

Attachments

·
Registered
Joined
·
2,091 Posts
Discussion Starter #10 (Edited)
sold item here
 
  • Like
Reactions: EquisBe

·
Registered
Joined
·
2,091 Posts
Discussion Starter #11 (Edited)
gen1 xb custom made center console/armrest/rear table.armrest has storage area. each side of the rear table has 2x usb chargers, 1 is 1amp, 1 is 2.1 amp.front side of armrest has 2x single 1amp usb chargers. sprayed black and table top is dark grey plastidip. a piece of wood mounts to the transmission hump and the table is then screwed to that to secure it down. power and ground needs to be run to the underside of the front part of the table. cup holders are removable. ill wipe it down and clean it off when i remove it from the car. $80 plus shipping and paypal fees.

i have more pics of the armrest, but they were too big to post. pm me for more pics
 

Attachments

·
Registered
Joined
·
2,091 Posts
Discussion Starter #12 (Edited)
keytechniques keyhole covers. whats left of paint is solar yellow (RS2) slides into keyhole on the two front doors and would paint to color match car so it looks cleaner. $12 shipped

spline wheel lock set with key. only 15 pictured, but i have the last one for the set which will be included
$12 shipped

pioneer remote. brand new, never been used, still has plastic separating the battery.
$10 shipped
 

Attachments

  • Like
Reactions: EquisBe

·
Registered
Joined
·
2,091 Posts
Discussion Starter #13 (Edited)
sold item here
 

·
Registered
Joined
·
2,091 Posts
Discussion Starter #14 (Edited)
gen1 xb passenger side C pillar 10" shallow mount sub box with real carbon fiber finish. fitment is almost spot on, theres a small gap where it meets the roof near the door. needs a spacer for the seat belt bolt that i will include. $200 plus shipping and paypal fees for the enclosure alone, or $280 for the enclosure and the pioneer shallow mount sub plus shipping and paypal fees.



Misc items.
all prices do not include shipping.
1/4" spacers $15
Boss a/v amplifier 1 in 7 out. $40
Pac va26 video switcher. 2 in 6 out. 2 available. $40 each
Dei 530t window modules sold. Each module controls two window up and down via alarm remote and gives one touch at the switch. Arm alarm and the windows roll up, hold aux button and the windows roll down. SOLD
 

Attachments

·
Registered
Joined
·
2,091 Posts
Discussion Starter #15 (Edited)
gen1 xb custom built cabinet for trunk. this is designed to sit on the trunk floor and butts up against the back seat to utilize all the area for storage

2 drawers, top drawer is smaller from front to back than the bottom one.

there are two small holes in the front of the drawer on the bottom, as i had two wire spools in there and the wire came out of the holes so i never had to open the drawer to pull wire.

exterior dimensions: 18" wide, 15.5" top to bottom, 20.5" bottom front to back, 16" top front to back.

top drawer interior dimensions: 14" wide, 6" top to bottom, 14.5" bottom front to back, 13" top front to back.

bottom drawer interior dimensions: 14" wide, 6.25" top to bottom, 17.25" bottom front to back, 15.5 top front to back.

SUPER STURDY!!!

i had a board under it to level out for the front and rear lip, which i no longer have, so some wood cutting on your own will be involved.

it has been very well used over the last few years, so there are marks on it and some screw holes, but a quick re-spray will fix it right up.

$100 plus shipping and paypal fees.
 

Attachments

·
Registered
Joined
·
2,091 Posts
Discussion Starter #16 (Edited)
sold item here
 

·
Registered
Joined
·
2,091 Posts
Discussion Starter #17 (Edited)
gen1 xb real carbon fiber laid over oem gas door. top left corner is worn past the CF, but with some sanding and a re-clearing, this could look almost new! $40 plus shipping and paypal fees
 

Attachments

·
Registered
Joined
·
2,091 Posts
Discussion Starter #18 (Edited)
first two pics:
gen1 xb custom made, one of a kind, billet aluminum washer reservoir cap. just needs a good polish and it will shine like new. $55 shipped

second two pics:
gen1 xb custom made, one of a kind, billet aluminum coolant reservoir cap. just needs a good polish and it will shine like new. $55 shipped

buy both together for $100 shipped
 

Attachments

·
Registered
Joined
·
2,091 Posts
Discussion Starter #19 (Edited)
misc OEM parts:

gen1 xb 2006.5 oven door section. difference in this from previous years is the pass airbag light is in the center with a knock out plate for switches on either side, as opposed to older ones have 3 knock out plates. has some scuffs on the oven door. $15 plus shipping and paypal fees.

gen1 xb rear hatch panel. $15 plus shipping and paypal fees
 

Attachments

·
Registered
Joined
·
2,091 Posts
Discussion Starter #20 (Edited)
gen1 xb billet middle grill painted black. no mounting hardware is included.
$20 plus shipping and paypal fees

under door scion logo lights. got these when they first came out and never even took them out of the box. $15 shipped

gen1 xb rear floor mats not much to say, theyre rear floor mats lol. $20 plus shipping and paypal fees
 

Attachments

1 - 20 of 64 Posts
Top