Scion xB Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
546 Posts
Discussion Starter #1
Not really sure if this post belongs in this area but here it goes....So about a month and a half ago i installed an aftermarket hub with steering wheel on my xb and everything has worked fine on it, till now....The steering wheel now makes a clicking noise as I turn either left or right....To me it sounds like its the same click you get when you use your turn signals and turn the steering wheel back to the straight position...im not sure if anyone else has experienced this problem with aftermarket steering wheel but can anybody help? Thanks....
 

·
RADIER HATER!!!
Joined
·
1,198 Posts
Try tightening the bolts on the wheel to the hub (better to remove them clean bolt and wheel then reinstall) ..... I had this noise years ago in a truck I had. Dirty/Dust would get inbetween the hub and wheel and cause this wierd clickin type noise when I turned the wheel. It was either that or the hub might be rubbing on something.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top