Scion xB Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I recently purchased a new 2006 ScionXb and ordered a trailer hitch to pull my hot dog cart with from Hitches Online.com. The problem is, how do I hook up my lights to a flat four connector to allow my trailer lights to work. I found the wires for the turn signal and break in each wire harness(right and left) at the tail lights. When I tried to tap into the lights for my left signal and tested it, both signal lights came on instead of just the left one. Any Ideas on how to make this scenerio work?

Scioneer
 

·
Registered
Joined
·
69 Posts
I'm going to quote myself from another thread "Scion xB with Trailer"

"Unless you are skilled in wiring I would recommend that you have that done by the trailer services shop, the hitch is a bolt up but unless you know what you are doing you can mess up the wiring."

There are also 2 different wiring kits that you can buy, I don't know which one you got nor do I knoiw which one you need. However, just a guess is that you may have the wrong kit - this is a pure guess, if in doubt go back to my original recommendation.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top