Scion xB Forum banner
Status
Not open for further replies.
1 - 14 of 14 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 · (Edited)

·
Nor*Cal's Most Hated
Joined
·
3,841 Posts
The PE SC actually puts out the highest amount of hp out of the three that I know of. It includes the parts for the fuel delivery also.
 

·
Registered
Joined
·
13 Posts
Discussion Starter · #3 · (Edited)
What does Ps mean? I am assuming they meant Psi, but I highly doubt that the Xb engine could handle 150 pounds of forced induction. I also noticed that it says .5 kpa. In Canada their boost guages read kpa instead of Psi so daoes anyone know what .5 kpa would convert to as far as Psi is concerned.
 

·
Nor*Cal's Most Hated
Joined
·
3,841 Posts
trev8705 said:
What does Ps mean? I am assuming they meant Psi, but I highly doubt that the Xb engine could handle 150 pounds of forced induction. I also noticed that it says .5 kpa. In Canada their boost guages read kpa instead of Psi so daoes anyone know what .5 kpa would convert to as far as Psi is concerned.
PE = Power Enterprises

SC = supercharger
 

·
TheOtherGuys
Joined
·
7,988 Posts
If I had the money to blow, I would go with the PE.
 

·
Nor*Cal's Most Hated
Joined
·
3,841 Posts
Padanky said:
If I had the money to blow, I would go with the PE.
Chris,. I'll have something coming your way shortly. ;)
 

·
TheOtherGuys
Joined
·
7,988 Posts
squirrel said:
Chris,. I'll have something coming your way shortly. ;)
You sure? LOL

Don't forget the paint code.
 

·
Nor*Cal's Most Hated
Joined
·
3,841 Posts

·
Registered
Joined
·
2 Posts
Argh, Thread hijacked.
What we need to know is how many psi the sc will boost at. Any response that can answer this question would be appreciated
 

·
Registered
Joined
·
201 Posts
the most complete kit out available is the Greddy....with a few tuning and other aftermarket parts, it will prolly make the most for the xB

plus it includes the EMANAGE....

SCI XB 2003-on MP45 cast manif. w/ e-manage 11511501 $3,280.00
 

·
Registered
Joined
·
131 Posts
cashstacker said:
Argh, Thread hijacked.
What we need to know is how many psi the sc will boost at. Any response that can answer this question would be appreciated
in reality it should be around 7-8 psi but people have read up to about 12psi on their boost gauges. 1 bar is around 14.7 psi so .5kpa is around 7.5 psi.
 

·
Registered
Joined
·
845 Posts
Motor FX said:
the most complete kit out available is the Greddy....with a few tuning and other aftermarket parts, it will prolly make the most for the xB

plus it includes the EMANAGE....

SCI XB 2003-on MP45 cast manif. w/ e-manage 11511501 $3,280.00

I was told by greddy this is for AT only ???
 

·
Nor*Cal's Most Hated
Joined
·
3,841 Posts
mybadbox said:
I was told by greddy this is for AT only ???
Ernie,

I think Steve checked on this, and it was good for both manual and auto.
 

·
Registered
Joined
·
131 Posts
that thing looks like it could be installed in 3 hrs...so simple yet so nice:D
 
1 - 14 of 14 Posts
Status
Not open for further replies.
Top