[Danthomas96]

Any thoughts about what would be causing my clutch on a 2008 xB to just stop disengaging the trans? The clutch goes to the floor with just about the normal pressure, but it struggles to come back up. If I am pushing the clutch all the way to the floor it won’t disengage the transmission and still try’s to drive. The master is not leaking on the carpet under the pedal.

 

[superbee 4406]

No fluid loss?
I would look for any leaks or a wet line somewhere
You are loosing pressure and it doesn't have the power to move the throw out enough
to release the clutch
It could be either the slave or master cyl going bad
I would check the slave first
Not a difficult fix