Scion xB Forum banner

2008 AC condenser work around...

974 views 2 replies 2 participants last post by  2008xb 
#1 ·
I have to replace a failed Radiator fan motor... Since I have 185K on this car I probably will replace the shroud and both fans.
It looks like there's enough room around the AC High Pressure pipe that I should be able to lift the condenser clear of the shroud and support it while I do the work. Has anyone been able to do this without damaging this very small aluminum pipe? Thanks!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top