Camber Bolts up front - Scion xB Forum
 
LinkBack Thread Tools
post #1 of 1 Old 06-25-2006, 01:48 AM Thread Starter
NEXT LEVEL MOTORING
 
ThunderGod's Avatar
 
Join Date: Dec 2005
Location: 東京都 / 新宿区
Posts: 3,810
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
ThunderGod is on a distinguished road
(Thread Starter)
Camber Bolts up front

w/o camber bolts


w/ camber bolts


you can get these Camber bolts from NLMOTORING

Replace both strut to spindle mounting bolts to achieve up to ±2°.

You know the procedure. safety first, use proper tools, perform this at your own risk. you are liable for your own modding.


Camber bolts




Set parking brake on, jack it up, use proper blocks/jack stand, remove wheels.


Using 19mm socket/wrench, lossen the top bolt only. remove the bottom bolt completely.


Insert camber bolts per instruction. (make sure you read it! you need to install it properly) use 15mm for the bolt, and you will need 18mm for the locknut.

Tighten everything up to spec. manually, and visually check everything. test drive vehicle safely.



Last edited by ThunderGod; 06-25-2006 at 01:51 AM.
ThunderGod is offline  
Sponsored Links
Advertisement
 
Closed Thread

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome