Installed cold air intake and now it's throwing codes
po101 p0300 po301 po304 says it's getting too much air and a couple cylinders are misfiring. also the Trac off light is on.
do I need to buy a programmer or have the car tuned for more air?
thanks ahead of time for any help
Re: Installed cold air intake and now it's throwing codes
I installed a short ram and got the "three stooges" lights. I had to tweak the throttle line a bit and lights went away. It was too loud on the hwy so I took it off after a long trip. Put in a K&N drop in filter much better.
You may have to unplug the negative battery terminal for about 30 minutes, plug it back up and let the computer relearn. I've had to do that too with the K&N
Sent from my SM-G900T using Tapatalk
|All times are GMT -5. The time now is 05:41 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.