Scion xB Forum - View Single Post - DIY Video of "How to Lower xB"
View Single Post
post #19 of Old 10-03-2008, 12:47 AM Thread Starter
awdwill
Registered User
 
awdwill's Avatar
 
Join Date: Aug 2007
Posts: 39
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
awdwill is on a distinguished road
(Thread Starter)
Re: DIY Video of "How to Lower xB"

Please note: Please re-grease the strut mount's bearings! The old grease might have deteriorated already, so after you put back to center big strut nut, please put a THICK layer of multi-purpose grease on top of the bearing ($5 at Kragen's). Otherwise, the strut mount would not be able to move freely on top of the strut, and this could cause severe damage. Please see page 26-13 of the repair manual. If you didn't do this, it's never too late... just re-open the dust seal, spray some WD-40, clean up (degrease) the old grease with cotton-tip applicators, and apply fresh grease to the bearings.
awdwill is offline  
 
 
For the best viewing experience please update your browser to Google Chrome