Wally-World-Fogs-SICK!

Big_Kokujin · 12-13-2008, 12:29 AM

These fogs are old news...like Gothbox, I too had them back in the day. If you do get them, I say get the clear lenses, i went through two sets of the yellow ones(rock damage) but never had any problems with the clear...

15yroldSciontist · 12-13-2008, 04:41 PM

Quote:

Originally Posted by clotiauxcc

thats cool

Thanks? haha

AdamsBox · 12-16-2008, 07:39 AM

i dont think the color lense affects whether or not rocks hit them? lol unless you mean the clear ones are just tougher/thicker plastic they would be the same.

Goosetavo · 01-12-2009, 05:07 PM

Hey Sciontist! I Just found this post, and what you did is what I was looking to do with my box. I'm new at this, so I was hoping you would share a couple of pics of where exactly you connected the wires, and how you attached the fogs to the grill...?
I'm an idiot for these things.

Let me know,

Thanks!

hotweelz4me · 01-12-2009, 05:31 PM

Yep, old news, but still nice and cheap mods!

I had em before my lip kit, just need to drill some holes!

PCH · 01-12-2009, 08:54 PM

Quote:

Originally Posted by Goosetavo

I'm new at this, so I was hoping you would share a couple of pics of where exactly you connected the wires

Once you get the lights mounted you can connect them to the factory foglight wires allready preinstalled into every xB. Here is the installation manual (Thank you, Tomas) that shows extra parts needed and where they go (relay, fuse and switch): http://tijil.org/Scion_Docs/04_xB_Sh...xBFogLamps.pdf

Haunted_Green · 01-13-2009, 02:21 PM

Yes i have shopped the wally lights for many applications including my cycle

Goosetavo · 01-13-2009, 02:24 PM

Hey guys, thanks! That looks nice Hotweelz4me. I was looking for the factory fog lights, but I really like this look better... I think I'll give it a try soon.

Thanks again!

hotweelz4me · 02-04-2009, 08:48 PM

Got the fogs back in with red LED's inside the assembly for shows and fun!

PCH · 02-04-2009, 11:20 PM

Thats BRIGHT! What kind of LEDs? More info please.

hotweelz4me · 02-04-2009, 11:26 PM

I installed a Oznium Superflux 4 chip LED in each fog. There is a small hole in the center directly under the mounting bolt. The Superflux housing fits perfectly in that hole nice and snug! I will post more pics up tomorrow with just the LED's on.

TheReaper · 02-05-2009, 08:00 PM

Nice this might be my next mod and if i screw it up its only like $25

2bluexb · 02-05-2009, 08:02 PM

anyone done this with bellit grills yet?

gravebox · 02-05-2009, 08:32 PM

i've got some wally world fogs too

JDM yellow style though

thinking about converting them to HID though, the 55watt halogens in there run REALLY hot. if i sit still for longer than 15 minutes, you start to small a hot plastic small... not good. so i'm gonna do a cheapo HID H3 conversion to them with some 3000k bulbs.

hotweelz4me · 02-06-2009, 12:11 AM

hmm, interesting. Let me know when you do this. I would love to see how to swap these over to HID.

gravebox · 02-06-2009, 12:19 AM

it should be pretty easy, just use H3 style bulbs and run new wire harness through the housing and use the stock power input and have it going into the ballast. because they are 55watt bulbs to begin with, then that means there's more than enough power supply for the 35watt ballasts. the main gain from this, much less heat production, i don't want them melting lol.

o6xbizzle · 02-06-2009, 12:20 AM

SAKURA · 02-06-2009, 12:25 AM

i needs "yellow" lens fogs . . . .

gravebox · 02-06-2009, 12:25 AM

^^yep those are pretty darn close to mine.

narts · 02-07-2009, 06:12 AM

i think im gonna ditch my factory fogs and install those. and jus wire it up with the factory wires.