2006 Dash in an 05 xb & unlocking door issue

TypeX · 09-22-2009, 06:41 PM

I sold my BB illuminated dash for an OEM dash and cash.
Upon installing the OEM dash, everything plugs in with the exception of the Passenger airbag light (is on the lower cubby)

Now i'm having issues with my unlock/lock.

My keyless entry will only lock and unlock the passenger side.
(wont flash on unlock either)

Is that due to the console? Anyone ever have this issue or is there a fuse i should be looking for?

Thanks in advance
- Mike

PCH · 09-22-2009, 07:04 PM

So if you click Unlock once the driver door doesn't unlock? What about Locking/Unlocking from inside with the button by the window switch?

TypeX · 09-22-2009, 08:50 PM

When i click the unlock on the keypad my passenger sides unlock
and the drivers sides stay locked. (and no flashing lights)

When i LOCK the car with the keypad... my passenger sides lock
and the drivers sides stay wherever they were left...(and the lights flash)

I'm thinking theres a Pin in the 05 dash harness thats getting a "bad read" from the "06 HVAC on the console"

I first thought it would be since theres a missing harness for the airbag in the "cubby" but i'm thinking toyota routed that down BUT my wiring keeps it up top hence the "issue" lol

PCH · 09-22-2009, 10:30 PM

Something is not plugged in. Both rear doors for example are controlled by 2 wires that split to right and left sides AFTER the door lock relay. So if only one side of the rear doors work that means that the signal is lost somewhere. Junction connector left unplugged or something like this.

TypeX · 09-23-2009, 05:34 AM

It worked prior to the dash install so i'll recheck the door panels maybe something popped out.
Junction connector meaning the ones that go into the silver door control panels?

PCH · 09-23-2009, 11:32 AM

Junction connectors are the ones that mate different sections of wiring harness together. For the door lock system there is one near the right center dash vent (has blue/black and blue/orange wires).
Try going over everything you had to touch when replacing the dash. Hope this is something simple cuz looking at the wiring diagramm i can't see how you can have the lights flash on Lock but not on Unlock.