JDM Fenders?

859Toaster · 11-20-2008, 07:25 PM

Ok, I don't know if anyone has what I am looking for.... But it's worth a shot.

In Japan, most cars sold in the US as well as Japan have different fenders. Cosmetically, they are the same. HOWEVER there is a dimension difference, that will benefit US cars.

Unless Japan ships us Japan Spec fenders (to meet their motor vehicle safety regs), our cars have narrow fenders compared to the Toyota bB.

If anyone knows anything about this, and for sure... Please let me know. Then I will be on the search for Fender part numbers, to get from Japan. Which we can probably get threw a Toyota Dealer here in the US. I know I was able to order my Toyota Cavalier Fenders, and Tail lights threw a GM dealer. And even though the guy had NO IDEA! what I was talking about, when I gave him the p/n's they showed in stock at the warehouse, and description matched.

SO!

Help the community out. If you can do a little research (i've been trying) and find out if they are different, this will benefit those who ride low. Giving just a little more room for tire. And you can add it to your I'm a JDM Whore list. lol

TOFUlenny · 11-20-2008, 07:40 PM

lol rolling Fenda's FTW

but yea iono bout the JdM fenders tho

hahaha

859Toaster · 11-20-2008, 07:50 PM

well rolling fenders is helpfully, but you can get a extra 1/2" from JDM fenders typically.

TOFUlenny · 11-20-2008, 08:05 PM

lol well tru but it all depends on how low you wanna go.... like if i had Air-runner or Air-Ride i would love to hit the floor but i have Coils and i am happy with them but i wanna set mine at a respectively nice height where i am low and still looks good haha

^_^

yellow_sub · 11-20-2008, 08:18 PM

or you could flare. or get custom wheels that will fit to your liking rofl

ToyBox_02 · 11-20-2008, 08:44 PM

I would take sum jdm fenders if u could get sum. If I could get another 1/2" of clearance that would b tight then I could go a lil wider

bB_Gunnz · 11-20-2008, 09:02 PM

The oem fenders in Japan are the same as ours. They have to do the same things we do, to provide more clearance.

1/2" of extra clearance is easy to do with our fenders.

859Toaster · 11-20-2008, 09:10 PM

alright. It was just my last hope to helping those make more clearance, with out having to pull a James

sdsnybny · 11-20-2008, 10:41 PM

Part #'s are diff??? seems to be 2 diff sets for the bB

2000 & up bB fenders

LH

53812‑52060 NCP30, 31, 35
53812‑52060 NCP30, 31, 35

53812‑52080 NCP3*; ｱﾘ(ｻｲﾄﾞﾏﾂﾄﾞｶﾞ-ﾄﾞ)
53812‑52080 NCP30, 31, 35; ｱﾘ(ｻｲﾄﾞﾏﾂﾄﾞｶﾞ-ﾄﾞ)

RH

53811‑52040 NCP30, 31, 35
53811‑52040 NCP30, 31, 35

53811‑52080 NCP3*; ｱﾘ(ｻｲﾄﾞﾏﾂﾄﾞｶﾞ-ﾄﾞ)
53811‑52080 NCP30, 31, 35; ｱﾘ(ｻｲﾄﾞﾏﾂﾄﾞｶﾞ-ﾄﾞ)

Dont know what the diff is cant read the kanji characters

2004 xB & up

LH
53802‑52050 NCP31
RH
53801‑52050 NCP31

One of my fav sites

http://www.toyodiy.com/parts/

gothbox · 11-20-2008, 11:50 PM

hmm, this could be really cool.
I could use some extra space too, even AFTER spacing and pulling the fenders out, ha ha

859Toaster · 11-21-2008, 12:46 PM

hmmm I'm going to put my friend matt on this... He works for toyota America, but should be able to get the info...

yellow_sub · 11-21-2008, 01:12 PM

well they bumpers are the same width so i doubt the fenders are a diff width

**ogerdgonz** · 11-21-2008, 01:17 PM

What was the dimension difference on your cavalier?

859Toaster · 11-21-2008, 05:08 PM

it was about 1/2" (little less) front the top center of the wheel arch out further, than the US fender. Also came with side markers

(that was just a added bonus. They used Saab side markers from a Aero.)

Needless to say, when the Toyota fenders were installed, I wasn't rubbing front tires when dragging anymore, and I was able to turn a little bit at 0psi.

Oh and I heard from my friend Matt. He apparently, does not have access to the JDM parts department. He works for the US division, and the Japaneses building is like right across the street. lol.