INJEN Help

jpscion · 02-06-2006, 03:08 PM

Ok I installed the injen short ram last night and had no CEL light all the way home (2hrs). Go to drive to work this morning and half way there CEL comes on along with TRAC OFF and VSC... any suggestions?

squirrel · 02-06-2006, 04:36 PM

Reset the ECU, and let it idle for 10-15 monutes.

Check the articles section on how to reset the ECU.

Let me know how it works out.

JDMBox05 · 02-06-2006, 05:49 PM

i had the CEL TRAC OFF and VSC go off on me at the track once, had my ecu read, turns out i had a misfire in cylinder 2 and 4. Had my ECU flased and everything went back to normal

jpscion · 02-08-2006, 01:01 PM

ok did that this morning and it worked until about 2 pm.... any other ideas for it to disappear forever? outside of disconnecting the lights of course.

Dajap · 02-08-2006, 01:05 PM

I disconnected the battery for about 10min. let it idle for like 10min with the lights still on and when I started to drive they dissapeared.

squirrel · 02-08-2006, 01:10 PM

have you checked to make sure everything is tight and fastened securely?

I had my INJEN SRI for over 2 years w/ no problems.