[yellow_sub]

AHHHHH! i meant camber shims sorry guys. the ones for the rear. okay i know that OTG makes camber plates but who else makes them and who makes one with more camber than the OTG ones? i wanna camber the hell out of my new 15's

[jpscion]

Garson, DiPark, alot of places make them just no one else has Toe Correction... Plus they are hard to get.. I know where a set of Garson Plates are for 160 shipped brand new... 4 degrees too... But no toe correction.

[superjeer]

that I've seen, just them. I know people have some custom ones from them with more -camber. email van and find out

[jpscion]

Vann wont make em with more camber... the Style bB guys already asked...

[yellow_sub]

how much are the -5 degree ones and how would i got about correcting the toe?

[MattyRattyPoo]

Edit your title to "camber shims." Cmaber plates are for the front. Cusco makes those and if you want them, I called Island Motorsports and they have 2 in stock i belive. (714) 522-7457. This will give you up to -3 in the front.

[jpscion]

http://vipstylecars.com/forum/index.php?topic=3707.0 here is the link for the Garsons.. the plate itself is -4 and Scion's camber in almost a degree so you will sitting @ approx 5.7-6 degrees of neg camber. Most good alignment shops can bring the toe in...

[excitebox]

http://www.optionimports.com/114-410-a.html

cusco front camber plates $226

[bboxed_in]

if you can't get your hands on the Garson's you might want to check out the Anceltion's. it appears they're trying to establish themselves in the U.S. market (since their introduction of the their IS250 demo car @ '05 SEMA Las Vegas). try to see if you can contact a representative. they have -3 or -5 degree plates.

http://www.anceltion.co.jp/en/

[yellow_sub]

Originally Posted by bboxed_in

if you can't get your hands on the Garson's you might want to check out the Anceltion's. it appears they're trying to establish themselves in the U.S. market (since their introduction of the their IS250 demo car @ '05 SEMA Las Vegas). try to see if you can contact a representative. they have -3 or -5 degree plates.

http://www.anceltion.co.jp/en/

thanks a ton bro thats exactly what i was looking for. 5 degrees in the rear. right after i get my wheels this is what i'll be getting!

[SAKURA]

RealCamber.com | Camber Shims for the Scion xB
They have -3/-5 w/toe correction and stackable with their camber shims and most other spacer shims.

[wingzeroboi]

lol almost a 3 year thread >_>

[squirrel]

Originally Posted by wingzeroboi

lol almost a 3 year thread >_>

I was thinking the same thing!

[SAKURA]

just keeping peeps up to date on where you can getem, or the only place you can getem in the U.S.

[yellow_sub]

ROFL i though a newb bumped this. i'm still happy with my anceltions

[EZBAKED]

You put them back on?

[yellow_sub]

not yet the wheels are on they're way then i'll throw em on. you still gonna be making sets?

[EZBAKED]

Originally Posted by yellow_sub

not yet the wheels are on they're way then i'll throw em on. you still gonna be making sets?

Yea I mite I still have all the info and wont forget who helped me get it. I just have some billet air stuff in the works right now but after that I just mite. I still want to run some but hate buyn what I can make.